The Intelix ASW-WP VGA/HDMI Input and HDBaseT Output Auto-Switching Wallplate is ideal for use in conference rooms and other presentation venues where the video source cannot be known in advance.
It automatically adapts to just about any kind of input, then transmits and then converts and transmits that signal to the display device via a single twisted-pair cable (such as Cat-6) using the HDBaseT protocol.
HDBaseT twisted-pair receivers are sold separately below, so you can get exactly the functionality you need. (add to your cart below):
Depending upon which receiver your choose, the system can be powered via PoH [aka PoE] from the transmitter and/or the receiver end of the run, so no power supply is not included, but you will need at least one power supply per run. If you need a power supply, you may add it to your cart below.
Like most Intelix products, the ASW-WP comes with a two year limited warranty from the manufacturer.
The Intelix ASW-WP is a two-gang, Decora-style wall plate designed to be the primary PC interface for classrooms, boardrooms, and conference centers. It features VGA + Audio to HDMI conversion and an HDMI input. The unit will detect which input has an active video input, and switch to that input – if both inputs are active, the “last in” will be selected. There are additional contact closure inputs provided on the rear of the unit to allow third party control. RS232 control of the ASW-WP can be accomplished by connecting to the RS232 port on a compatible receiver, such as a DIGI-HD60C-R.
The ASW-WP utilizes HDBaseT technology to extend the digital output up to 60 meters away using standard Cat6 cable. This transmitter device is compatible with several Intelix HDBaseT receivers, but is designed to work primarily with the DIGI-HD60C-R. The unit features multiple EDID modes to eliminate user confusion, and incompatible video formats.
The ASW-WP can be powered from the rear panel, or by Power over HDBaseT (PoH). Built-in surge protection and diagnostic LEDs ensure hassle-free and robust installations. The Auto-Switching Wallplate also features a customizable power management system, which will put the unit into a low power state after no video for 30 minutes or being inactive for 3 hours by default.
The ASW-WP can be programmed to control the connected display. The display manufacturer’s RS232 commands can be entered into the ASW-WP with the use of Intelix Display Control software. This allows display power and input to be automatically controlled based on video activity, eliminating the need for a third party control system in many installations.
Here is a side view,
This photo shows the front with the cover plate removed
Shown here is the back of the ASW-WP HDMI/VGA auto-switching wallplate.
This excerpt from the Intelix New Technology Guide illustrates additional details about the ASW-WP - click to download PDF.
Here are the tech specs - click to download PDF.
Intelix ASW-WP Quick Start Guide - click to download PDF.
This is the ASW-WP Installation and Operation Guide / Manual - click to download PDF.
Design excellence, high quality materials, meticulous workmanship, and superior service...put it all together and you get a superior product. Don't get stuck with bad advice, poor service, slow shipment or an inferior product. If you want the best, here it is.