he Intelix DIGI-HD60-S HDBaseT HDMI Transmitter sends video and multi-channel audio over a single twisted-pair cable, such as Cat-5 or Cat-6.
Incorporating HDBaseT technology, the DIGI-HD60-S supports 1080p video and multi-channel audio at distances up to 60 meters (195 feet) as well as 2k, 4k, and 3D at distances as great as 35 meters (115 feet).
Built-in surge protection and diagnostic LEDs ensure robust and hassle-free installation. Used with a compatible receiver, this HDBaseT transmitter handles advanced HDMI video formats, including (but not limited to) 2D, 3D, 120Hz, 240Hz, along with all of the lossless audio formats.
The DIGI-HD60 series units are fully HDBaseT compliant, so they will work with any compatible Intelix system, as well as any system that conforms to the HDBaseT standard.
With its enclosed design, the Intelix DIGI-HD60 units may be used stand-alone, or may also be rack-mounted by using an optional rack-mount kit. Connection to HDMI is via standard Type A connectors. HDMI cables are not included, but we do have them available here.
Connection to the twisted-pair cables is via RJ45. The system leverages PoH (Power over HDBaseT) technology, which means that it can be powered at either the transmitter or the receiver end. The DIGI-HD60 is a point to point extender only - it cannot be cascaded, although we do offer both transmitter and receiver units separately, for use with compatible systems.
The DIGI-HD60-S transmitter unit comes with (2) mounting brackets and a printed Installation Guide. Since the system can be powered at either end, the power supply is sold separately below.
Supports both A/V and PoH when used with these Intelix HDBaseT receivers:
Supports A/V only with these Intelix HDBaseT receivers:
As with virtually all systems that are based upon twisted-pair cable technology, the Intelix DIGI-HD60-S HDBaseT HDMI Receiver will work with virtually any twisted-pair cables, including Cat-5e and Cat-6, but range and bandwidth is directly related to both distance and cable quality, so to get the highest resolutions at the greatest distances, you will want high-quality, low-skew cables. If you want the very best pre-terminated cables Cat-6 UTP cables, please consider our VideoTwist cables.
Like most Intelix products, the DIGI-HD60-R comes with a two year limited warranty from the manufacturer.
The Intelix DIGI-HD60-S extends HDMI over a single cable by incorporating HDBaseT technology. The DIGI-HD60-S supports a 1080p video signal, including HDCP 2.2 and multichannel audio, up to 60m, as well as 3D and 4K x 2K signals up to 35m. Built-in surge protection and diagnostic LEDs ensure hassle-free and robust installations. Flexible power design allows the units to be powered at either the TX or RX end, and only one power supply is required. The power supply (PS-24D-25) is sold separately.
The DIGI-HD60 series extenders are compatible with all Intelix HDBaseT product offerings and any product that meets the HDBaseT specifications.
The front-right perspective of the transmitter is shown in this photo.
This photo shows the left side panel.
The right side panel is shown here.
This is the spec sheet for the DIGI-HD60 series, in PDF format.
Here is the Installation Manual for the DIGI-HD60 series, in PDF format.
Design excellence, high quality materials, meticulous workmanship, and superior service...put it all together and you get a superior product. Don't get stuck with bad advice, poor service, slow shipment or an inferior product. If you want the best, here it is.